4" LOW VOLTAGE REMODEL AIR TIGHT HOUSING

***THIS IS A UNIVERSAL HOUSING MEANING ITS COMPATIBLE WITH ALL OTHER MAJOR BRAND HOUSINGS AND TRIMS SUCH AS (HALO, LITON, ELITE, NORA, ELCO, DMF, JET, AND ETC)***

SPECIFICATION

Ceiling cut-out: 4 1/2"

Lamp Type: 12V 50W MAX MR16 BULB

Application:

General purpose recessed downlight housing for low to medium height ceilings for residential and light commercial applications. A variety of trims, compatible styles and finishes are available to achieve the proper décor and illumination.

Housing:

Pre-wired housing adjusts up to a 1 1/4” ceiling thickness. Integral thermal protector to guard against improper lamping and installation. Trim is secured with torsion wing springs.

Mounting:

Houing is suitable for existing or new construction installation, supplied with high tension remodeling clips, designed to secure the housing on existing sheet rock sieling for fast and easy instalation. 

Transformer:

Class H insulated magnetic transformer installed adjacent to junction box, bottom and top accesible. Thermally protected rated for 90 degress celcius. 

Socket:

2-pin porcelain socket with aluminum heat sink plate. Lamp clips to trim to ensure proper and consistent positioning

Junction Box:

16 gauge pre-wired galvanized steel Junction Box, 32 cubic-inch for a maximum of (8) #12 AWG wires. Furnished with (7) 3/4" and (4) Romex knock-outs. Strain clamps to install or remove covers for easy access and ground wire. Equipped with safety standard fitting for flex-conduit.

Insulation Contact:

non IC rated  housing must be kept 3 inches from the insulation. 

Airflow:

Airtight option is designed to restrict air flow from room into plenums in compliance to the WSEC - Washington State Energy Code, (Less than 2.0 CFM -Cubic Feet per Minute). Complies to Title24 air flow requirements (Air-tight).

Safety Labels:

UL, ETL listed. NYC approved. Calender #41937